Diagram for Reference

 

Device uses a MOC3041 optotriac and a BT136 triac in a standard application to drive bulbs. Note if you want to use stronger bulbs, like 100W or more, you need to use some little radiators to cool down the triacs. There are 4 channels, 3 are used for bulbs and 4th is used as an extra 230V output – in this case for a mini strobe. You can find 4 goldpins on board, these are a 4 extra output channels – so you can expand device to another optotriacs and triacs to use 4 more 230V devices. To your own safety, use a proper fuse, and remember that device works on a 230V potential. You can use it with 110V devices instead of 230V, no problem.